R3303-HP HSR6800 Routers Fundamentals Command Reference

122
Table 14 Command output
Field Descri
p
tion
Master Board Active MPU.
The boot file used this time System software image that has been loaded.
attribute
Attributes of a system software image:
• main—The device always attempts to load this image at
startup.
• backup—The device attempts to load this image is the main
image is not available or has been corrupted.
• secure—The device attempts to load this image if neither a
main or backup image is available or can be used. You
cannot set a secure image at CLI. To specify a secure image,
access the Boot menu during the startup process. For more
information, see the software upgrade part in the release
notes for your device.
The boot file used next time System software image to be used for the next startup.
Slave Board Standby MPU.
Slave Board is Absent The standby MPU is not in the slot.
In IRF mode:
# Display system software images.
<Sysname> display boot-loader
The primary bin to boot of chassis 1 board 0 at this time is: cfa0:/test.bin
The primary bin to boot of chassis 1 board 0 at next time is: cfa0:/test.bin
The slave bin to boot of chassis 1 board 0 at next time is: cfa0:/test.bin
The primary bin to boot of chassis 2 board 0 at this time is: cfa0:/test.bin
The primary bin to boot of chassis 2 board 0 at next time is: cfa0:/test.bin
The slave bin to boot of chassis 2 board 0 at next time is: cfa0:/test.bin
Table 15 Command output
Field Descri
p
tion
The primary bin to boot of chassis 1 board
0 at this time is
System software image that has been loaded on slot 0 of IRF
member 1.
The primary bin to boot of chassis 1 board
0 at next time is
Main system software image used at next startup for slot 0 of IRF
member 1.
The slave bin to boot of chassis 1 board 0
at next time is
Backup system software image used at next startup for slot 0 of
IRF member 1.
Related commands
boot-loader
display patch
Use display patch to display information about the installed patch package or patch files.