R3303-HP HSR6800 Routers Fundamentals Command Reference

130
# Load patches from a patch file for the card in slot 3 on IRF member 1.
<Sysname> system-view
[Sysname] patch load chassis 1 slot 3
# Load patches from a patch package file for the card in slot 3 on IRF member 1.
<Sysname> system-view
[Sysname] patch load chassis 1 slot 3 file flash:/patchpackege.bin
patch location
Use patch location to configure the patch loading location.
Syntax
patch location patch-location
Default
The patch loading location is cfa0:.
Views
System view
Default command level
3: Manage level
Parameters
patch-location: Specifies the patch loading location, a string of 1 to 64 characters. The file must be saved
in the root directory of a storage medium.
Usage guidelines
This command specifies the location from which the device loads patches when executing the patch load
command.
For reliable patch loading, HP recommends saving patch files to the root directory of CF card (cfa0:)
If your device has an additional storage medium, you can save patch files on that storage medium except
that you must use this command to specify the file location.
If you device has only one storage medium, you do not need to execute this command.
The patch install patch-location command can change the patch loading location that has been
specified with the patch location command. The patch install file filename command does not change
the patch loading location.
Examples
# Configure the root directory of the CF card as the patch loading location.
<Sysname> system-view
[Sysname] patch location cfa0:
patch run
Use patch run to confirm ACTIVE patches.
Syntax
In standalone mode: