R3303-HP HSR6800 Routers Fundamentals Command Reference

137
The timestamps in system messages are adjusted in reference to the time zone and daylight saving
schedule.
Examples
# Set the local time zone to add 5 hours to UTC time.
<Sysname> system-view
[Sysname] clock timezone z5 add 5
Related commands
• clock datetime
• clock summer-time one-off
• clock summer-time repeating
• display clock
configure-user count
Use configure-user count to configure the maximum number of users allowed to enter system view at the
same time.
Use undo configure-user count to restore the default.
Syntax
configure-user count number
undo configure-user count
Views
System view
Default command level
2: System level
Parameters
number: Specifies the maximum number of concurrent users. The number value is in the range of 1 to
654.
Usage guidelines
Two users are allowed to enter system view by default.
When multiple users enter system view to configure certain attribute, only the most recent configuration
applies.
When the number of users has already reached the limit, other users can not enter system view.
Examples
# Configure to allow up to four users to enter system view concurrently.
<Sysname> system-view
[Sysname] configure-user count 4
Related commands
display configure-user