R3303-HP HSR6800 Routers Fundamentals Command Reference

150
#
controller E1 6/2
pri-set
#
controller E1 6/3
using e1
#
return
# Display the configuration from the line containing "user-interface" to the last line in the running
configuration.
<Sysname> display current-configuration | begin user-interface
user-interface con 0
user-interface aux 0
user-interface vty 0 4
authentication-mode none
user privilege level 3
#
return
# Display the running SNMP configuration.
<Sysname> display current-configuration | include snmp
snmp-agent
snmp-agent local-engineid 800063A203000FE240A1A6
snmp-agent community read public
snmp-agent community write private
snmp-agent sys-info version all
undo snmp-agent trap enable ospf 100
Related commands
• display saved-configuration
• reset saved-configuration
• save
display device
Use display device to display device information.
Syntax
In standalone mode:
display device [ cf-card | usb ] [ [ chassis chassis-number ] [ slot slot-number [ subslot subslot-number ] ]
| verbose ] [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display device [ cf-card | usb ] [ chassis chassis-number [ slot slot-number [ subslot subslot-number ] ] |
verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view