R3303-HP HSR6800 Routers Fundamentals Command Reference

152
Field Descri
p
tion
Status
Card status:
• Slave—The card is a standby MPU.
• Master—The card is an active MPU.
• Absent—No card is in the slot.
• Fault—Error occurred, and the card cannot start correctly.
• Normal—The card is an interface card and is operating correctly.
Primary
Whether the card is an active MPU or standby MPU. For a non-MPU
card, the value of this field is N/A.
Subslots Maximum number of subcards that a card supports.
# In IRF mode, display information about the current IRF fabric.
<Sysname> display device
Chassis Slot Type State Subslot Soft Ver Patch Ver
1 0 RSE-X2 Master 0 HSR6804 None
1 1 4EXP Normal 0 HSR6804 None
1 2 None Absent 0 None None
1 3 None Absent 0 None None
1 4 None Absent 0 None None
1 5 None Absent 0 None None
2 0 RSE-X2 Slave 0 HSR6804 None
2 1 None Absent 0 None None
2 2 4EXP Normal 0 HSR6804 None
2 3 None Absent 0 None None
2 4 None Absent 0 None None
1 5 None Absent 0 None None
The output shows that the IRF fabric comprises two member devices with member IDs 1 and 2. The card
in slot 0 on member device 1 is the active MPU of the IRF fabric. The cards in slot 0 and slot 1 of member
device 2 are standby MPUs of the IRF fabric.
Table 21 Command output (In IRF mode)
Field Descri
p
tion
Chassis ID of the IRF member device.
Slot Slot number of the card on the IRF member device.
Type Card type.
State
Current status of the card:
• Absent—No card is in the slot.
• Master—The card is the active MPU of the current IRF fabric.
• Slave—The card is a standby MPU of the current IRF fabric.
• Normal—The card is an interface card and is operating correctly.
• Fault— Error occurred, and the card cannot start correctly.
Subslot Maximum number of subcards that a card supports.
Soft Ver Version of the software running on a card.