R3303-HP HSR6800 Routers Fundamentals Command Reference

156
Temperature information (degree centigrade):
----------------------------------------------------
SlotNo Temperature Lower limit Upper limit
0 30 0 80
1 32 0 80
2 38 0 80
# In IRF mode, display temperature information.
<Sysname> display environment
System temperature information (degree centigrade):
----------------------------------------------------
Chassis Board Temperature Lower limit Upper limit
1 0 26 0 80
1 1 29 0 80
1 2 31 0 80
display fan
Use display fan to display the operating states of fans.
Syntax
In standalone mode:
display fan [ fan-id ] [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display fan [ chassis chassis-number [ fan-id ] ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
chassis chassis-number: Displays the operating states of fans for an IRF member device. The
chassis-number argument represents the IRF member ID of the device. If no IRF member device is
specified, this command displays the operating state of fans on all IRF member devices. (In IRF mode.)
fan-id: Displays the operating state of the specified fan, where fan-id represents the built-in fan number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# In standalone mode, display the operating states of all fans.