R3303-HP HSR6800 Routers Fundamentals Command Reference

# Set the authentication mode for user privilege level switching to scheme local.

<Sysname> system-view

[Sysname] super authentication-mode scheme local

Related commands

super password

Use super password to set a password for a user privilege level.

Use undo super password to restore the default.

Syntax

super password [ level user-level ] [ hash ] { cipher | simple } password

undo super password [ level user-level ]

Default

No password is set for any user privilege level.

Views

System view

Default command level

2: System level

Parameters

level user-level: Specifies a user privilege level in the range of 1 to 3. The default is 3.

hash: Enables hash-based encryption.

{ cipher | simple } password: Specifies a case-sensitive password string. In FIPS mode, the password must

include upper-case letters, lower-case letters, digits, and special characters. The password length and

form requirements vary as shown in Table 1 and Table 2.

Table 1 Password length and form requirements

for the

password

argument in non-FIPS mode

word combination Password strin

form

Len

th (in characters)

simple Plain text 1 to 16

hash simple Plain text 1 to 16

cipher Plain text, ciphertext

Plain text: 1 to 16

Ciphertext: 1 to 53

hash cipher Ciphertext (hashed form) 1 to 110

Table 2 Password length and form requirements for the

password

argument in FIPS mode

word Password strin

form

Len

th (in characters)

simple Plain text 8 to 16

hash simple Plain text 8 to 16