R3303-HP HSR6800 Routers Fundamentals Command Reference

164
Related commands
• schedule reboot at
• schedule reboot delay
display system-failure
In standalone mode, use display system-failure to display the exception handling method for the active
MPU and standby MPU.
In IRF mode, use display system-failure to display the exception handling method for all IRF member
devices.
Syntax
display system-failure [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
3: Manage level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the exception handling method.
<Sysname> display system-failure
System failure handling method: reboot
display transceiver
Use display transceiver to display the key parameters of transceiver modules.
Syntax
display transceiver { controller [ controller-type controller-number ] | interface [ interface-type
interface-number ] } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level