R3303-HP HSR6800 Routers Fundamentals Command Reference

165
Parameters
controller [ controller-type controller-number ]: Displays the key parameters of the transceiver module in
a controller interface. The controller-type controller-number argument specifies a controller interface by its
type and number. If no controller interface is specified, this command displays the key parameters for the
transceiver modules in all controller interfaces.
interface [ interface-type interface-number ]: Displays the key parameters of the transceiver module in an
interface. The interface-type interface-number argument specifies an interface by its type and number. If
no interface is specified, this command displays the key parameters of the transceiver modules in all
interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the key parameters of the transceiver module in interface GigabitEthernet 3/0/3.
<Sysname> display transceiver interface gigabitethernet 3/0/3
GigabitEthernet3/0/3 transceiver information:
Transceiver Type : 1000_BASE_SX_SFP
Connector Type : LC
Wavelength(nm) : 850
Transfer Distance(m) : 550(50um),270(62.5um)
Digital Diagnostic Monitoring : YES
Vendor Name : HP
Ordering Name : JD117B
Table 25 Command output
Field Descri
p
tion
transceiver information Transceiver module information.
Transceiver Type Transceiver module type.
Connector Type
Connector type options:
• SC—Fiber connector developed by NTT.
• LC—1.25 mm/RJ-45 fiber connector developed by Lucent.
• RJ-45.
• CX 4.
Wavelength(nm)
• Fiber transceiver: central wavelength (in nm) of the transmit
laser. If the transceiver supports multiple wavelengths, every
two wavelength values are separated by a comma.
• Copper transceiver: displayed as N/A.