R3303-HP HSR6800 Routers Fundamentals Command Reference

166
Field Descri
p
tion
Transfer Distance(xx)
Transfer distance, with xx representing km for single-mode
transceiver modules and m for other transceiver modules. If the
transceiver module supports multiple transfer media, every two
transfer distance values are separated by a comma. The
corresponding transfer medium is included in the bracket
following the transfer distance value. The following are the
supported transfer media:
• 9 um—9/125 um single-mode fiber.
• 50 um—50/125 um multi-mode fiber.
• 62.5 um—62.5/125 um multi-mode fiber.
• TP—Twisted pair.
• CX4—CX4 cable.
Digital Diagnostic Monitoring
Support for the digital diagnosis function:
• YES—supported.
• NO—not supported.
Ordering Name Product code.
display transceiver alarm
Use display transceiver alarm to display alarms existing on transceiver modules.
Syntax
display transceiver alarm { controller [ controller-type controller-number ] | interface [ interface-type
interface-number ] } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
controller [ controller-type controller-number ]: Displays alarms that exist on the transceiver module in a
controller interface. The controller-type controller-number argument specifies a controller interface by its
type and number. If no controller interface is specified, this command displays alarm information for the
transceiver modules in all controller interfaces.
interface [ interface-type interface-number ]: Displays the alarms that exist on the transceiver module in
an interface. The interface-type interface-number argument specifies an interface by its type and number.
If no interface is specified, this command displays alarm information for the transceiver modules in all
interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.