R3303-HP HSR6800 Routers Fundamentals Command Reference

176
Use undo power-supply policy priority to restore the default.
Syntax
In standalone mode:
power-supply policy priority priority slot slot-number
undo power-supply policy priority slot slot-number
In IRF mode:
power-supply policy priority priority chassis chassis-number slot slot-number
undo power-supply policy priority chassis chassis-number slot slot-number
Default
The power supply priority of a card is 2.
Views
System view
Default command level
3: Manage level
Parameters
priority: Priority value in the range of 1 to 3. The smaller the priority value, the higher the priority of a
card.
slot slot-number: Specifies the slot number of a card. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. (In IRF mode.)
Usage guidelines
Set a higher power supply priority for the card that is processing or will process critical services, so as to
ensure the power supply to the card when the power supply is insufficient or when the power supply
recovers.
Examples
# In standalone mode, set the power supply priority for the card in slot 1 to 10.
<Sysname> system-view
[Sysname] power-supply policy priority 10 slot 1
# In IRF mode, set the power supply priority for the card in slot 1 on IRF member device 1 to 10.
<Sysname> system-view
[Sysname] power-supply policy priority 10 chassis 1 slot 1
reboot
In standalone mode ,use reboot to reboot a card, a subcard, or the whole device.
In IRF mode, use reboot to reboot all IRF member devices, an IRF member device, or a card.
Syntax
In standalone mode:
reboot [ slot slot-number [ subslot subslot-number ] ]
In IRF mode: