R3303-HP HSR6800 Routers Fundamentals Command Reference

177
reboot [ chassis chassis-number [ slot slot-number [ subslot subslot-number ] ] ]
Views
User view
Default command level
3: Manage level
Parameters
slot slot-number: Specifies the slot number of a card. If you do not specify this option, this command
reboots all cards. (In standalone mode.)
chassis chassis-number: Specifies an IRF member device by its chassis number. If no IRF member device
is specified, this command reboots all IRF member devices. (In IRF mode.)
subslot subslot-number: Specifies the subslot number of a subcard. It you do not specify this option, this
command reboots all subcards.
Usage guidelines
CAUTION:
• A device reboot can interrupt network services.
• If the main system software image file has been corrupted or does not exist, the device cannot reboot.
You must re-specify a main system software image file, or power off the device and then power it on so
the system can reboot with the backup system software image file.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
You cannot use the reboot command to reboot the standby MPUs. Instead, use the slave restart
command (see High Availability Command Reference).
Examples
# In standalone mode, reboot the device. (Output not shown.)
<Sysname> reboot
# In IRF mode, reboot member device 2. (Output not shown.)
<Sysname> reboot chassis 2
remove
Use remove to unmount a card or subcard.
Syntax
remove slot slot-number [ subslot subslot-number ]
undo remove slot slot-number [ subslot subslot-number ]
Views
User view
Default command level
2: System level