R3303-HP HSR6800 Routers Fundamentals Command Reference

178

Parameters

slot slot-number: Specifies the slot number of a card.

subslot subslot-number: Specifies the subslot number of a subcard. It you do not specify this option, this

command unmounts the card.

Usage guidelines

Unmounting a card or subcard stops the services provided on the card or subcard.

Interfaces on an unmounted subcard are unconfigurable and cannot be used.

After you use the undo remove command to mount a subcard back, a configuration restoration process

occurs. If you reboot the subcard before the process is completed, an error message appears: "This card

is being configured. You can’t reboot it now."

Examples

# Unmount the card in slot 2.

<sysname> remove slot 2

This command will remove the specified board, Continue? [Y/N]:y

You can not configure the card now.

Please wait...

You can pull out the card now.

Related commands

collection-interval

reset unused porttag

Use reset unused porttag to clear unused 16-bit interface indexes of the active MPU and the standby

MPUs.

Syntax

reset unused porttag

Views

User view

Default command level

1: Monitor level

Usage guidelines

A confirmation is required when you execute this command. The command will not run if you enter N to

cancel the operation or fail to make a confirmation within 30 seconds.

Examples

# Clear unused 16-bit interface indexes.

<Sysname> reset unused porttag

Current operation will delete all unused port tag(s). Continue? [Y/N]:y