R3303-HP HSR6800 Routers Fundamentals Command Reference

182
undo schedule reboot
Default
The scheduled reboot function is disabled.
Views
User view
Default command level
3: Manage level
Parameters
hh:mm: Specifies a delay for the device reboot, in the hh:mm format. The hh value is in the range of 0
to 720, and the mm value is in the range of 0 to 59. When the hh value is 720, the mm value cannot be
more than 0.
mm: Specifies a delay for the device reboot in minutes, in the range of 0 to 43200.
Usage guidelines
CAUTION:
• A device reboot interrupts network services.
• Changing any clock setting can cancel the reboot schedule.
The reboot delay cannot exceed 30 x 24 x 60 minutes, or 30 days.
The device supports only one device reboot schedule. If you configure the schedule reboot delay
command multiple times, the last configuration takes effect. The schedule reboot at command and the
schedule reboot delay command overwrite each other, and whichever is configured last takes effect.
The alert "REBOOT IN ONE MINUTE" appears 1 minute before the reboot time.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
Examples
# Schedule a device reboot in 88 minutes. This example assumes that the current time is 11: 48 o n J u n e
6, 2006.
<Sysname> schedule reboot delay 88
Reboot system at 13:16 06/06/2006(in 1 hour(s) and 28 minute(s)). confirm? [Y/N]:
Enter y at the prompt. If you have used the terminal logging command to enable the log display function
(enabled by default) on the terminal, the system automatically displays a reboot schedule log message.
<Sysname>
%Jun 6 11:48:44:860 2006 Sysname CMD/4/REBOOT:
vty0(192.168.1.54): Set schedule reboot parameters at 11:48:44 06/06/2006, and system will
reboot at 13:16 06/06/2006.
Related commands
schedule reboot at
shutdown-interval
Use shutdown-interval to set the port status detection timer.