R3303-HP HSR6800 Routers Fundamentals Command Reference

184
Views
System view
Default command level
2: System level
Parameters
sysname: Name of the device, a string of 1 to 30 characters.
Usage guidelines
A device name identifies a device in a network and works as the user view prompt at the CLI. For
example, if the device name is Sysname, the user view prompt is <Sysname>.
Examples
# Set the name of the device to R2000.
<Sysname> system-view
[Sysname] sysname R2000
[R2000]
system-failure
Use system-failure to configure the exception handling method for MPUs.
Use undo system-failure to restore the default.
Syntax
system-failure { maintain | reboot }
undo system-failure
Default
The system adopts the reboot method to handle exceptions for MPUs.
Views
System view
Default command level
3: Manage level
Parameters
maintain: Specifies that when the system detects any software abnormality, it maintains the current
situation, and does not take any measure to recover itself.
reboot: Specifies that when the system detects any software abnormality, it recovers itself through
automatic reboot.
Usage guidelines
The system always reboots a failed interface card or the auxiliary CPU system when an exception occurs
to them.
The exception handling method only works for the failed card. It does not influence the functions of other
cards or IRF member devices.