R3303-HP HSR6800 Routers Fundamentals Command Reference

189
Syntax
transceiver phony-alarm-disable
undo transceiver phony-alarm-disable
Default
Alarm traps are enabled for transceiver modules.
Views
System view
Default command level
3: Manage level
Usage guidelines
If you install a transceiver module whose vendor name is not HP, the system repeatedly outputs traps and
logs to notify you to replace the module. To continue to use such a transceiver module that is
manufactured or customized by HP but has no vendor information, you can disable alarm traps so that
the system stops outputting alarm traps.
Examples
# Disable alarm traps for transceiver modules.
<Sysname> system-view
[Sysname] transceiver phony-alarm-disable
view
Use view to specify a view for a job.
Use undo view to remove the view of a job.
Syntax
view view-name
undo view
Default
No view is specified for a job.
Views
Job view
Default command level
3: Manage level
Parameters
view-name: Specifies a view in which commands in the job run. A view name is a string of 1 to 90
characters.
Usage guidelines
Every job can have only one view. If you specify multiple views, the most recently specified view takes
effect.