R3303-HP HSR6800 Routers Fundamentals Command Reference

21
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command is not available in FIPS mode.
Examples
# Display the configuration of the device when it serves as a Telnet client.
<Sysname> display telnet client configuration
The source IP address is 1.1.1.1.
The output shows that the device uses the source IPv4 address 1.1.1.1 for outgoing Telnet packets when it
serves as a Telnet client.
display user-interface
Use display user-interface to display user interface information.
Syntax
display user-interface [ num1 | { aux | console | vty } num2 ] [ summary ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
num1: Specifies the absolute number of a user interface. The value range for the num1 argument is 0 to
653.
aux: Specifies the AUX user interface.
console: Specifies the console user interface.
vty: Specifies the VTY user interface.
num2: Specifies the relative number of a user interface. The value range for the num2 argument is 0 to
1 for AUX ports, 0 to 1 for console ports, and 0 to 4 for VTY ports.
summary: Displays summary information about user interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about user interface 0.
<Sysname> display user-interface 0
Idx Type Tx/Rx Modem Privi Auth Int
+ 0 CON 0 9600 - 3 N -