R3303-HP HSR6800 Routers Fundamentals Command Reference

24
The output shows that two users have logged in to the device: one is using user interface VTY 0 and the
other is using VTY 1. The one using VTY 0 is at 192.168.1.54 and is the one who executed the display
command.
Table 5 Command output
Field Descri
p
tion
Idx Absolute number of the user interface.
UI
Relative number of the user interface. For example, with VTY, the first column
represents user interface type, and the second column represents the relative number of
the user interface.
Delay Time elapsed after the user's last input, in the format hh:mm:ss.
Type User type, such as Telnet or SSH.
Userlevel User level: 0 for visit, 1 for monitor, 2 for system, and 3 for manage.
+ Current user, the user who executed the display command.
Location IP address of the user.
F The current user is operating in asynchronous mode.
escape-key
Use escape-key to define a shortcut key for terminating a task.
Use undo escape-key to disable the shortcut key for terminating tasks.
Syntax
escape-key { default | character }
undo escape-key
Default
Pressing Ctrl+C terminates a task.
Views
User interface view
Default command level
3: Manage level
Parameters
character: Specifies the shortcut key for terminating a task, a single character (or its corresponding ASCII
code value in the range of 0 to 127) or a string of 1 to 3 characters. Only the first character of a string
functions as the shortcut key. For example, if you enter an ASCII code value of 113 , t h e s y s t e m u s e s i t s
corresponding character q as the shortcut key. If you enter the string q@c, the system uses the first
character q as the shortcut key.
default: Restores the default escape key sequence Ctrl+C.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect. To display the
effective shortcut key definition, use the display current-configuration command.