R3303-HP HSR6800 Routers Fundamentals Command Reference

37
undo redirect return-deal from-terminal
Default
The user interface does not change carriage returns received from a terminal during redirecting a Telnet
connection.
Views
User interface view
Default command level
2: System level
Usage guidelines
This command is supported only on AUX user interfaces.
This command is applicable to user interfaces on which redirect is enabled. To enable redirect on a user
interface, use the redirect enable command.
Examples
# Enable user interface AUX 0 to process the carriage returns sent from terminals when redirecting a
Telnet connection.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] redirect return-deal from-terminal
redirect timeout
Use redirect timeout to set the idle timeout timer for Telnet redirect. If no data is received from a Telnet
client before the timer expires, the user interface terminates the redirected connection.
Use undo redirect timeout to allow the system to maintain a redirected Telnet connection until you tear
down the connection.
Syntax
redirect timeout time
undo redirect timeout
Default
The idle timeout is 360 seconds.
Views
User interface view
Default command level
2: System level
Parameters
time: Specifies the idle timeout in the range of 30 to 86400 seconds.
Usage guidelines
This command is supported only on AUX user interfaces.
This command is applicable to user interfaces on which redirect is enabled. To enable redirect on a user
interface, use the redirect enable command.