R3303-HP HSR6800 Routers Fundamentals Command Reference

39
send { all | num1 | { aux | console | vty } num2 }
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all user interfaces.
num1: Specifies a user interface by its absolute number. The value range for the num1 argument is 0 to
653.
aux: Specifies an AUX user interface.
console: Specifies a console user interface.
vty: Specifies a VTY user interface.
num2: Specifies the relative number of a user interface. The value range for the num2 argument is 0 to
1 for AUX ports, 0 to 1 for console ports, and 0 to 4 for VTY ports.
Usage guidelines
To end message input, press Ctrl+Z. To cancel message input and return to user view, press Ctrl+C.
Examples
# Send message hello abc to your own user interface Console 0.
<Sysname> send console 0
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
hello abc^Z
Send message? [Y/N]:y
<Sysname>
***
***
***Message from con0 to con0
***
hello abc
<Sysname>
# Before you restart the device, inform other login users so they prepare for the reboot:
1. Display information about the user interfaces that are being used.
<Sysname> display users
The user application information of the user interface(s):
Idx UI Delay Type Userlevel
+ 82 VTY 0 00:00:00 TEL 3
83 VTY 1 00:00:03 TEL 3
Following are more details.
VTY 0 :