R3303-HP HSR6800 Routers Fundamentals Configuration Guide

IMPORTANT:

The system software image file used for the next startup must be saved in the root directory of the stora

medium.

# Reboot the router and the software is upgraded.

<Router> reboot

TFTP client configuration examples for IRF mode

Network requirements

The IRF fabric in Figure 47 comprises two member devices and can communicate with the PC. The slot

numbers of the active MPU and the standby MPU on the master and subordinate device are 0 and 1

respectively.

Configure the PC as the TFTP server, and use TFTP to download the system software image file newest.bin

from the TFTP server to the client and upload the configuration file config.cfg from the TFTP client to the

server for backup.

Figure 47 Network diagram

Configuration procedure

This configuration procedure assumes that the PC and the IRF fabric can reach each other.

1. Configure the PC (TFTP server):

{ Enable TFTP server. (Details not shown.)

{ Configure a TFTP working directory. (Details not shown.)

2. Configure the IRF fabric (TFTP client):

# Examine the storage medium of the device for insufficiency or impairment. If no sufficient free

space is available, use the fixdisk command to fix the storage medium or use the

delete/unreserved file-url command to delete unused files. (Details not shown.)

# Download system software image file newest.bin from the PC to the master and subordinate

devices:

{ Download system software image file newest.bin from the PC to the CF root directory (cfa0:/)

of the IRF fabric's active MPU.

<Sysname> tftp 1.2.1.1 get newest.bin