R3303-HP HSR6800 Routers Fundamentals Configuration Guide

125
Figure 56 Network diagram
Configuration procedure
1. Save the system software image and configuration file in the TFTP server's working directory.
(Details not shown.)
2. Upgrade the IRF fabric:
# Download new-config.cfg from the TFTP server to the MPUs of the master.
<IRF> tftp 2.2.2.2 get new-config.cfg
..
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait.....
TFTP: 917 bytes received in 1 second(s)
File downloaded successfully.
<IRF> tftp 2.2.2.2 get new-config.cfg chassis1#slot1#cfa0:/new-config.cfg
# Download new-config.cfg to the MPUs on IRF member device 2.
<IRF> tftp 2.2.2.2 get new-config.cfg chassis2#slot0#cfa0:/new-config.cfg
<IRF> tftp 2.2.2.2 get new-config.cfg chassis2#slot1#cfa0:/new-config.cfg
# Download soft-version2.bin from the TFTP server to each IRF member device.
<IRF> tftp 2.2.2.2 get soft-version2.bin
...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait............
TFTP: 10058752 bytes received in 141 second(s)
File downloaded successfully.
<IRF> tftp 2.2.2.2 get soft-version2.bin chassis1#slot1#cfa0:/soft-version2.bin
<IRF> tftp 2.2.2.2 get soft-version2.bin chassis2#slot0#cfa0:/soft-version2.bin
<IRF> tftp 2.2.2.2 get soft-version2.bin chassis2#slot1#cfa0:/soft-version2.bin
# Specify new-config.cfg as the next-startup configuration file for all the IRF member devices.
<IRF> startup saved-configuration new-config.cfg main
Please wait ...
Setting the master board ...
... Done!
Setting the slave board ...