R3303-HP HSR6800 Routers Fundamentals Configuration Guide

126
Slot 2:
Set next configuration file successfully
# Specify soft-version2.bin as the startup system software image for each MPU.
<IRF> boot-loader file soft-version2.bin chassis 1 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis
1 slot 0!
<IRF> boot-loader file chassis1#slot1#cfa0:/soft-version2.bin chassis 1 slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis
1 slot 1!
<IRF> boot-loader file chassis2#slot0#cfa0:/soft-version2.bin chassis 2 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis
2 slot 0!
<IRF> boot-loader file chassis2#slot1#cfa0:/soft-version2.bin chassis 2 slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis
2 slot 1!
# Reboot the IRF fabric to complete the upgrade.
<IRF> reboot
3. Use the display version command to verify that the upgrade has succeeded. (Details not shown.)