R3303-HP HSR6800 Routers Fundamentals Configuration Guide

24
Figure 5 through Figure 7 show the configuration procedure on Windows XP HyperTerminal.
Make sure the port settings are the same as listed in Table 11.
On Windows Server 2003, add the HyperT
erminal program first, and then log in to and manage
the device as described in this document. On Windows Server 2008, Windows 7, Windows Vista,
or some other operating system, obtain a third-party terminal control program first, and then follow
the user guide or online help to log in to the device.
Figure 5 Connection description
Figure 6 Specifying the serial port used to establish the connection