R3303-HP HSR6800 Routers Fundamentals Configuration Guide

25
Figure 7 Setting the properties of the serial port
5. Power on the device and press Enter at the prompt.
Figure 8 CLI
6. At the default user view prompt <HP>, enter commands to configure the device or view the running
status of the device. To get help, enter ?.
Configuring console login control settings
The following authentication modes are available for controlling console logins:
• None—Requires no authentication. This mode is insecure.
• Password—Requires password authentication.
• Scheme—Uses the AAA module to provide local or remote console login authentication. You must
provide a username and password to access the CLI.