R3303-HP HSR6800 Routers Fundamentals Configuration Guide

Configuring password authentication for AUX login

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter one or more AUX user

interface views.

user-interface aux first-number

[ last-number ]

N/A

3. Enable password

authentication.

authentication-mode password

By default, password

authentication is enabled but no

password is configured. To access

the device through the AUX port,

you must configure a password for

authentication.

4. Set a password.

set authentication password

[ hash ] { cipher | simple }

password

By default, no password is set.

5. Configure common settings

for AUX login.

See "Configuring common settings

for AUX login (

optional)."

Optional.

The next time you attempt to log in to CLI through the AUX port, you must provide the configured login

password, as shown in Figure 21.

Figure 21 Password authentication interface for AU

X login

Configuring scheme authentication for AUX login

Follow these guidelines when you configure scheme authentication for AUX login:

• To make the command authorization or command accounting function take effect, apply an

HWTACACS scheme to the intended ISP domain. This scheme must specify the IP address of the

authorization server and other authorization parameters.