R3303-HP HSR6800 Routers Fundamentals Configuration Guide

52
4. Launch the terminal emulation program and configure the communication properties on the PC.
Figure 24 through Figure 26 show the
configuration procedure on Windows XP HyperTerminal.
Make sure the port settings are the same as the common AUX port settings on the device. If the
default settings are used, see Table 17.
On Windows Server 2003, add the HyperT
erminal program first, and then log in to and manage
the device as described in this document. On Windows Server 2008, Windows 7, Windows Vista,
or some other operating system, obtain a third-party terminal control program first, and then follow
the user guide or online help of that program to log in to the device.
Figure 24 Connection description
Figure 25 Specifying the serial port used to establish the connection