R3303-HP HSR6800 Routers Fundamentals Configuration Guide

53
Figure 26 Setting the properties of the serial port
5. Power on the device and press Enter at the prompt.
Figure 27 CLI
6. At the default user view prompt <HP>, enter commands to configure the device or check the
running status of the device. To get help, enter ?.
Modem dial-in through the AUX port
The administrator can use a pair of modems to remotely connect to the device through its AUX port over
PSTN when the IP network connection is broken. To do so, make sure the dial-in connection, the device,
and the modems are correctly set up.