R3303-HP HSR6800 Routers Fundamentals Configuration Guide

58
Figure 33 Dialing in to the device without any authentication
Configuring password authentication for modem dial-in
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter one or more AUX user
interface views.
user-interface aux first-number
[ last-number ]
N/A
3. Enable password
authentication.
authentication-mode password
By default, password
authentication is enabled.
4. Set a password.
set authentication password
[ hash ] { cipher | simple }
password
By default, no password is set.
5. Configure common settings
for AUX user interfaces.
See "Configuring common settings
for modem dial
-in (optional)."
Optional.
The next time you attempt to dial in to the device, you must provide the configured login password, as
shown in Figure 34.