R3303-HP HSR6800 Routers Fundamentals Configuration Guide

61
Ste
p
Command Remarks
8. Create a local user
and enter local user
view.
local-user user-name By default, no local user exists.
9. Set a password for the
local user.
password [ [ hash ] { cipher | simple }
password ]
By default, no password is set.
10. Specify the command
level of the local user.
authorization-attribute level level
Optional.
By default, the command level is 0.
11. Specify terminal
service for the local
user.
service-type terminal
By default, no service type is
specified.
12. Configure common
AUX user interface
settings.
See "Configuring common settings for
modem di
al-in (optional)."
Optional.
The next time you attempt to dial in to the device, you must provide the configured username and
password, as shown in Figure 35.
Figure 35 Scheme authentication interface for modem dial-in user
s
Configuring common settings for modem dial-in (optional)
Some common settings configured for an AUX user interface take effect immediately and can interrupt
the login session. To save you the trouble of repeated re-logins, use a login method different from AUX
login to log in to the device before you change AUX user interface settings.
After the configuration is complete, change the terminal settings on the configuration terminal and make
sure they are the same as the settings on the device.