R3303-HP HSR6800 Routers Fundamentals Configuration Guide

64
Ste
p
Command Remarks
21. Specify a Telnet redirect
listening port.
redirect listen-port port-number
The default port number is the
absolute user interface number plus
2000.
22. Disable Telnet option
negotiation during
redirecting a Telnet
connection.
redirect refuse-negotiation
By default, Telnet option negotiation
is enabled.
23. Configure the user interface
to not convert the ASCII
characters 0xff during
redirecting a Telnet
connection.
redirect refuse-teltransfer
By default, the user interface
converts the ASCII characters 0xff to
0xff 0xff when redirecting a Telnet
connection.
24. Configure the user interface
to change carriage returns
0x0d 0x0a and 0x0d 0x00
received from Telnet clients to
0x0d during redirecting a
Telnet connection.
redirect return-deal from-telnet
By default, the user interface does
not change carriage returns
received from Telnet clients during
redirecting a Telnet connection.
25. Configure the user interface
to change carriage returns
0x0d 0x0a and 0x0d 0x00
received from a terminal (a
PC connected to the console
port for example) to 0x0d
during redirecting a Telnet
connection.
redirect return-deal from-terminal
By default, the user interface does
not change carriage returns
received from a terminal during
redirecting a Telnet connection.
26. Set the idle timeout timer for
Telnet redirect.
redirect timeout time
360 seconds by default.
If no data is received from a Telnet
client before the timer expires, the
user interface terminates the
redirected connection.
27. Manually terminate
redirected Telnet
connections.
redirect disconnect N/A
Displaying and maintaining CLI login
Task Command Remarks
Display information about the user
interfaces that are being used.
display users [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display information about all user
interfaces the device supports.
display users all [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Display user interface information.
display user-interface [ num1 |
{ aux | console | vty } num2 ]
[ summary ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.