R3303-HP HSR6800 Routers High Availability Command Reference

94
mtu
Use mtu to configure the MTU for the Layer 3 RPR logical interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU of a Layer 3 RPR logical interface is 1500 bytes.
Views
Layer 3 RPR logical interface view
Default command level
2: System level
Parameters
size: Specifies an Maximum Transmission Unit (MTU) value. The value range is 128 to 9600 bytes. The
maximum MTU configurable on an interface might be lower than 9600 bytes depending on the device
model, interface module model, and interface type.
Examples
# Configure the MTU of Layer 3 RPR logical interface RPR 1 as 1492.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] mtu 1492
Related commands
display interface rpr
reset counters interface rpr
Use reset counters interface rpr to clear statistics of the specified RPR logical interfaces.
Syntax
reset counters interface [ rpr [ interface-number ] ]
Views
User view
Default command level
2: System level
Parameters
rpr: Clears statistics of the RPR logical interfaces.
interface-number: Number of the RPR logical interface. It is the number of an existing interface.