R3303-HP HSR6800 Routers High Availability Command Reference

104
Views
Layer 3 RPR logical interface view
Default command level
2: System level
Parameters
station-name: Name of an RPR station, a string of 1 to 20 characters.
Examples
# Name the station as ABC on Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] rpr station-name ABC
rpr timer
Use rpr timer to set RPR timers.
Use undo rpr timer to restore the defaults.
Syntax
rpr timer { atd atd-value | holdoff holdoff-value | keepalive keepalive-value | stability stability-value |
tc-fast tc-fast-value | tc-slow tc-slow-value | tp-fast tp-fast-value | tp-slow tp-slow-value | wtr wtr-value }
undo rpr timer { atd | holdoff | keepalive | stability | tc-fast | tc-slow | tp-fast | tp-slow | wtr }
Default
• The ATD timer is 1 second.
• The hold-off timer is 0 milliseconds.
• The keepalive timer is 3 milliseconds.
• The topology stability timer is 40 milliseconds.
• The TC fast timer is 10 milliseconds.
• The TC slow timer is 100 milliseconds.
• The TP fast timer is 10 milliseconds.
• The TP slow timer is 100 milliseconds.
• The WTR timer is 10 seconds.
Views
Layer 3 RPR logical interface view
Default command level
2: System level
Parameters
atd atd-value: Sets the ATD timer, in the range of 1 to 10 seconds.
holdoff holdoff-value: Sets the hold-off timer, in steps of 10 milliseconds. The value range for the
holdoff-value argument is 0 to 200 milliseconds.
keepalive keepalive-value: Sets the keepalive timer, in the range of 2 to 50 milliseconds.