R3303-HP HSR6800 Routers High Availability Command Reference

105
stability stability-value: Sets the topology stability timer, in the range of 10 to 100 milliseconds.
tc-fast tc-fast-value: Sets the TC fast timer, in the range of 1 to 20 milliseconds.
tc-slow tc-slow-value: Sets the TC slow timer, which is in steps of 50 milliseconds. The value range for the
tc-slow-value argument is 50 to 10000 milliseconds.
tp-fast tp-fast-value: Sets the TP fast timer, in the range of 1 to 20 milliseconds.
tp-slow tp-slow-value: Sets the TP slow timer, in steps of 50 milliseconds. The value range for the
tp-slow-value argument is 50 to 10000 milliseconds.
wtr wtr-value: Sets the WTR timer, in the range of 0 to 1440 seconds.
Examples
# Set the ATD timer to three seconds on Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] rpr timer atd 3
rpr weight
Use rpr weight to set the weight of a station.
Use undo rpr weight to restore the default.
Syntax
rpr weight { ringlet0 | ringlet1 } value
undo rpr weight { ringlet0 | ringlet1 }
Default
The weight of a station is 2
0
=1.
Views
Layer 3 RPR logical interface view
Default command level
2: System level
Parameters
ringlet0: Sets the Ringlet 0 weight of the station.
ringlet1: Sets the Ringlet 1 weight of the station.
value: Expresses the weight as 2
value
. The value argument is in the range of 0 to 7.
Examples
# Set the weight of the station on Ringlet 0 to 4—two squared—on Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] rpr weight ringlet0 2