R3303-HP HSR6800 Routers High Availability Command Reference

107
shutdown
Use shutdown to shut down the interface.
Use undo shutdown to bring up the interface.
Syntax
shutdown
undo shutdown
Default
An interface is enabled.
Views
Layer 3 RPR logical interface view, RPRPOS interface view
Default command level
2: System level
Examples
# Shut down Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] shutdown
# Shut down RPR physical port RPRPOS 2/1/1.
<Sysname> system-view
[Sysname] interface rprpos 2/1/1
[Sysname-RPRPOS2/1/1] shutdown
threshold
Use threshold to set the SD or SF alarm threshold for the interface.
Use undo threshold to restore the default.
Syntax
threshold { sd | sf } value
undo threshold { sd | sf }
Views
RPRPOS interface view
Default command level
2: System level
Parameters
sd: Sets the signal degrade (SD) alarm threshold.
sf: Sets the signal fail (SF) alarm threshold.
value: SD or SF threshold value. It is interpreted as a negative exponent of 10e.