R3303-HP HSR6800 Routers High Availability Command Reference

111
XGE1/0/4
Table 35 Command output
Field Descri
p
tion
Flags for Node Mode
RRPP node mode:
• M—Master node.
• T—Transit node.
• E—Edge node.
• A—Assistant edge node.
RRPP Protocol Status
RRPP protocol status:
• Enable (globally enabled).
• Disable (globally disabled).
Number of RRPP Domains Number of RRPP domains configured.
Domain ID RRPP domain ID.
Control VLAN Control VLANs of the RRPP domain: Major and Sub.
Protected VLAN
List of VLANs protected by the RRPP domain. MSTIs are displayed here. To
get the VLANs corresponding to these MSTIs, use the display stp
region-configuration command.
Hello Timer Hello Timer value in seconds.
Fail Timer Fail Timer value in seconds.
Ring ID RRPP ring ID.
Ring Level
RRPP ring level.
• 0—Primary ring.
• 1—Subring.
Node Mode Node mode.
Primary/Common Port
• Primary port when the node mode is master node or transit node.
• Common port when the node mode is edge node or assistant edge
node.
• A hyphen (-) appears when the port is not configured on the ring or the
board to which the port belongs does not start.
Secondary/Edge Port
• Secondary port when the node mode is master node or transit node.
• Edge port when the node mode is edge node or assistant edge node.
• A hyphen (-) appears when the port is not configured on the ring or the
board to which the port belongs does not start.
Enable Status
RRPP ring status:
• Yes—Enabled.
• No—Disabled.
display rrpp ring-group
Use display rrpp ring-group to display the RRPP ring group configuration.
Syntax
display rrpp ring-group [ ring-group-id ] [ | { begin | exclude | include } regular-expression ]