R3303-HP HSR6800 Routers High Availability Command Reference

112
Views
Any view
Default command level
1: M o n i t o r L e ve l
Parameters
ring-group-id: Specifies the RRPP ring group ID in the range of 1 to 8.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no ring group ID is specified, this command displays the configuration of all ring groups.
If an RRPP ring ID is specified, this command displays the configuration of the specified RRPP ring group
on the current device.
For an edge node RRPP ring group, this command also displays the subring sending Edge-Hello packets.
Examples
# Display the configuration of all RRPP ring groups.
<Sysname> display rrpp ring-group
Ring Group 1:
domain 1 ring 1 to 3, 5
domain 2 ring 1 to 3, 5
domain 1 ring 1 is the sending ring
Ring Group 2:
domain 1 ring 4, 6 to 7
domain 2 ring 4, 6 to 7
Table 36 Command output
Field Descri
p
tion
Ring Group 1 RRPP ring group 1.
domain 1 ring 1 to 3, 5 Subrings in the ring group, including rings 1, 2, 3, and 5 in RRPP domain 1.
domain 1 ring 1 is the sending
ring
The sending ring of the ring group is ring 1 in RRPP domain 1.
Related commands
domain ring