R3303-HP HSR6800 Routers High Availability Command Reference

116
Syntax
display rrpp verbose domain domain-id [ ring ring-id ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
domain-id: RRPP domain ID in the range of 1 to 8.
ring-id: RRPP ring ID in the range of 1 to 64.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If an RRPP ring ID is specified, this command displays the detailed information of the specified ring in the
specified RRPP domain. Otherwise, this command displays the detailed information of all the rings in the
specified RRPP domain.
Examples
# Display the detailed information of ring 1 in RRPP domain 1.
<Sysname> display rrpp verbose domain 1 ring 1
Domain ID : 1
Control VLAN : Major 5 Sub 6
Protected VLAN: Reference Instance 0 to 2, 4
Hello Timer : 1 sec Fail Timer : 3 sec
Ring ID : 1
Ring Level : 1
Node Mode : Master
Ring State : Complete
Enable Status : Yes Active Status: Yes
Primary port : GigabitEthernet1/0/1 Port status: UP
Secondary port: GigabitEthernet1/0/2 Port status: BLOCKED
# Display the detailed information of all the rings in RRPP domain 2.
<Sysname> display rrpp verbose domain 2
Domain ID : 2
Control VLAN : Major 10 Sub 11
Protected VLAN: Reference Instance 3, 5 to 7
Hello Timer : 1 sec Fail Timer : 3 sec
Ring ID : 1