R3303-HP HSR6800 Routers High Availability Command Reference

117
Ring Level : 0
Node Mode : Master
Ring State : Complete
Enable Status : Yes Active Status: Yes
Primary port : GigabitEthernet1/0/4 Port status: UP
Secondary port: GigabitEthernet1/0/5 Port status: BLOCKED
Ring ID : 2
Ring Level : 1
Node Mode : Edge
Ring State : -
Enable Status : No Active Status: No
Common port : GigabitEthernet1/0/4 Port status: -
GigabitEthernet1/0/5 Port status: -
Edge port : GigabitEthernet1/0/3 Port status: -
Table 38 Command output
Field Descri
p
tion
Domain ID RRPP domain ID.
Control VLAN
Control VLANs of the RRPP domain:
• Major—Primary control VLAN.
• Sub—Secondary control VLAN.
Protected VLAN
List of VLANs protected by the RRPP domain. MSTIs are displayed here. To get the
VLANs corresponding to these MSTIs, use the display stp region-configuration
command.
Hello Timer Hello Timer value in seconds.
Fail Timer Fail Timer value in seconds.
Ring ID RRPP ring ID.
Ring Level
RRPP ring level:
• 0—Primary ring.
• 1—Subring.
Node Mode
Node mode:
• Master node.
• Transit node.
• Edge node.
• Assistant edge node.
Ring State
RRPP ring state:
• Complete—The ring is healthy.
• Failed—The ring is not closed.
If the ring is not enabled on the device working as the master node or the device is
not the master node of the ring, a hyphen (-) is displayed.
Enable Status
RRPP ring enable status:
• Yes—Enabled.
• No—Disabled.