R3303-HP HSR6800 Routers High Availability Command Reference

118
Field Descri
p
tion
Active Status
RRPP ring activation status. An RRPP ring can be active only when the RRPP protocol
and the RRPP ring are both enabled. You can also use this field to identify whether
the RRPP protocol are enabled. Two statuses are available:
• Yes—Active.
• No—Inactive.
Primary Port
The primary port field means the node mode is master node or transit node. A
hyphen (-) appears when the port is not configured on the ring or the board to which
the port belongs does not start.
Secondary Port
The secondary port field means the node mode is master node or transit node. A
hyphen (-) appears when the port is not configured on the ring or the board to which
the port belongs does not start.
Common Port
The common port field means the node mode is edge node or assistant edge node.
A hyphen (-) appears when the port is not configured on the ring or the board to
which the port belongs does not start.
Edge Port
The edge port field means the node mode is edge node or assistant edge node. A
hyphen (-) appears when the port is not configured on the ring or the board to which
the port belongs does not start.
Port status
Port status includes down, up and blocked; a hyphen (-) appears in one of the
following cases:
• The ring is inactive.
• The port is not configured on the ring.
• The board to which the port belongs does not start.
domain ring
Use domain ring to configure subrings for an RRPP ring group.
Use undo domain ring to remove the specified subrings from an RRPP ring group. If no subring ID list is
specified, all subrings in the ring group are removed in the specified domain.
Syntax
domain domain-id ring ring-id-list
undo domain domain-id [ ring ring-id-list ]
Views
RRPP ring group view
Default command level
2: System level
Parameters
domain-id: RRPP domain ID in the range of 1 to 8.
ring-id-list: RRPP subring ID list expressed in the format of ring-id-list={ ring-id [ to ring-id ] }&<1-10>,
where the ring-id argument is an RRPP subring ID in the range of 1 to 64 and &<1-10> indicates that you
can enter up to ten RRPP ring ID ranges.