R3303-HP HSR6800 Routers High Availability Command Reference

119
Usage guidelines
Follow these guidelines when configuring an RRPP ring group on the edge node and the assistant-edge
node:
• When assigning an active ring to a ring group, assign it on the assistant-edge node first and then
on the edge node.
• To remove an active ring from a ring group, remove it on the edge node first and then on the
assistant-edge node.
• To remove the whole ring group, remove it on the edge node first and then on the assistant-edge
node.
• When activating rings in a ring group, activate them on the assistant-edge node first and then on
the edge node.
• When deactivating rings in a ring group, deactivate them on the edge node first and then on the
assistant-edge node.
Failure to follow these guidelines can cause the failure of assistant-edge node to receive Edge-Hello
packets and mistakenly considering the primary ring as failed.
Examples
# Configure subrings for RRPP ring group 1.
<Sysname> system-view
[Sysname] rrpp ring-group 1
[Sysname-rrpp-ring-group1] domain 1 ring 1 to 3 5
[Sysname-rrpp-ring-group1] domain 2 ring 1 to 3 5
Related commands
• rrpp ring-group
• display rrpp ring-group
protected-vlan
Use protected-vlan to configure the protected VLANs for the RRPP domain.
Use undo protected-vlan to remove the protected VLAN configuration of the RRPP domain.
Syntax
protected-vlan reference-instance instance-id-list
undo protected-vlan [ reference-instance instance-id-list ]
Default
No protected VLAN is specified for an RRPP domain.
Views
RRPP domain view
Default command level
2: System level
Parameters
reference-instance instance-id-list: Specifies the Multiple Spanning Tree Instances (MSTIs) you want to
reference in the form of instance-id-list = { instance-id [ to instance-id ] }&<1-10>, where instance-id is an