R3303-HP HSR6800 Routers High Availability Command Reference

120
MSTI ID in the range of 0 to 16. instance-id 0 represents the common internal spanning tree (CIST).
&<1-10> means that you can specify up to 10 MSTI IDs or ID ranges. You can use the display stp
region-configuration command to display the instance-to-VLAN mappings (a device working in PVST
mode automatically maps VLANs to MSTIs).
Usage guidelines
If the reference-instance instance-id-list option is specified, the undo protected-vlan command removes
configuration of VLANs mapped to the specified MSTIs. Otherwise, the command removes configuration
of all protected VLANs.
You can delete or modify the protected VLANs configured for an RRPP domain before and after
configuring rings for it. However, you cannot delete configuration of all the protected VLANs configured
for the domain.
When the VLAN-to-MSTI mappings change, the protected VLANs of an RRPP domain also changes
according to the MSTIs configured for the domain.
Examples
# Map VLANs 1 through 30 to MSTI 1, activate the MST region configuration, configure VLAN 100 as
the control VLAN of RRPP domain 1, and configure VLANs mapped to MSTI 1 as the protected VLANs
of RRPP domain 1.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] instance 1 vlan 1 to 30
[Sysname-mst-region] active region-configuration
[Sysname-mst-region] quit
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] control-vlan 100
[Sysname-rrpp-domain1] protected-vlan reference-instance 1
Related commands
• display stp region-configuration (Layer 2—LAN Switching Command Reference)
• rrpp domain
reset rrpp statistics
Use reset rrpp statistics to clear RRPPDU statistics.
Syntax
reset rrpp statistics domain domain-id [ ring ring-id ]
Views
User view
Default command level
1: Monitor level
Parameters
domain-id: RRPP domain ID in the range of 1 to 8.
ring-id: RRPP ring ID in the range of 1 to 64.