R3303-HP HSR6800 Routers High Availability Command Reference

121
Usage guidelines
If you have specified an RRPP ring ID in the command, RRPPDU statistics of the specified RRPP ring in the
specified RRPP domain on the current device are cleared. Otherwise, RRPPDU statistics of all RRPP rings
in the specified RRPP domain are cleared.
Examples
# Clear the RRPPDU statistics of ring 10 in RRPP domain 1.
<Sysname> reset rrpp statistics domain 1 ring 10
Related commands
display rrpp statistics
ring
Use ring to configure the node mode of the device, the role of the specified RRPP port, and the level of
the RRPP ring.
Use undo ring to remove the configuration.
Syntax
ring ring-id node-mode { { master | transit } [ primary-port interface-type interface-number ]
[ secondary-port interface-type interface-number ] level level-value | { edge | assistant-edge }
[ edge-port interface-type interface-number ] }
undo ring ring-id
Views
RRPP domain view
Default command level
2: System level
Parameters
ring-id: RRPP ring ID in the range of 1 to 64.
master: Specifies the device as the master node of the RRPP ring.
transit: Specifies the device as the transit node of the RRPP ring.
primary-port: Specifies the port as a primary port.
interface-type interface-number: Specifies a port by its type and number. The port can be a Layer-2
Ethernet port, Layer-2 GE port, Layer-2 XGE port, or Layer-2 aggregate interface.
secondary-port: Specifies the port as a secondary port.
level-value: RRPP ring level, with 0 representing primary ring and 1 representing subring.
edge: Specifies the device as the edge node of the RRPP ring.
assistant-edge: Specifies the device as the assistant edge node of the RRPP ring.
edge-port: Specifies the edge port for the node.
Usage guidelines
The ID of an RRPP ring in a domain must be unique.
When an RRPP is enabled, you cannot configure its RRPP ports.