R3303-HP HSR6800 Routers High Availability Command Reference

123
[Sysname-rrpp-domain1] ring 10 node-mode transit primary-port gigabitethernet 1/0/1
secondary-port gigabitethernet 1/0/2 level 0
[Sysname-rrpp-domain1] ring 20 node-mode edge edge-port gigabitethernet 1/0/3
# Specify the device as the transit node of primary ring 10 in RRPP domain 1, GigabitEthernet 1/0/1 as
the primary port and GigabitEthernet 1/0/2 as the secondary port. Then, specify the device as the
assistant edge node of subring 20 in RRPP domain 1, GigabitEthernet 1/0/3 as the edge port.
<Sysname> system-view
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] control-vlan 100
[Sysname-rrpp-domain1] protect-vlan reference-instance 0 1 2
[Sysname-rrpp-domain1] ring 10 node-mode transit primary-port gigabitethernet 1/0/1
secondary-port gigabitethernet 1/0/2 level 0
[Sysname-rrpp-domain1] ring 20 node-mode assistant-edge edge-port gigabitethernet 1/0/3
Related commands
ring enable
ring enable
Use ring enable to enable the RRPP ring.
Use undo ring enable to disable the RRPP ring.
Syntax
ring ring-id enable
undo ring ring-id enable
Default
The RRPP ring is disabled.
Views
RRPP domain view
Default command level
2: System level
Parameters
ring-id: RRPP ring ID in the range of 1 to 64.
Usage guidelines
To activate the RRPP domain, enable the RRPP protocol and the RRPP rings for the RRPP domain.
Examples
# Enable RRPP ring 10 in RRPP domain 1.
<Sysname> system-view
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] control-vlan 100
[Sysname-rrpp-domain1] protect-vlan reference-instance 0 1 2
[Sysname-rrpp-domain1] ring 10 node-mode master primary-port gigabitethernet 1/0/1
secondary-port gigabitethernet 1/0/2 level 0
[Sysname-rrpp-domain1] ring 10 enable