R3303-HP HSR6800 Routers High Availability Command Reference

124
Related commands
rrpp enable
rrpp domain
Use rrpp domain to create an RRPP domain and enter its view.
Use undo rrpp domain to remove an RRPP domain.
Syntax
rrpp domain domain-id
undo rrpp domain domain-id
Views
System view
Default command level
2: System level
Parameters
domain-id: RRPP domain ID in the range of 1 to 8.
Usage guidelines
When you delete an RRPP domain, configurations of the control VLANs and protected VLANs are
deleted at the same time.
To delete an RRPP domain successfully, make sure that it has no RRPP rings.
Examples
# Create RRPP domain 1, and enter RRPP domain 1 view.
<Sysname> system-view
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1]
Related commands
• control-vlan
• protected-vlan
rrpp enable
Use rrpp enable to enable RRPP protocol.
Use undo rrpp enable to disable RRPP protocol.
Syntax
rrpp enable
undo rrpp enable
Default
RRPP protocol is disabled.