R3303-HP HSR6800 Routers High Availability Command Reference

125
Views
System view
Default command level
2: System level
Usage guidelines
To activate the RRPP domain, enable the RRPP protocol and the RRPP rings for the RRPP domain.
Examples
# Enable the RRPP protocol.
<Sysname> system-view
[Sysname] rrpp enable
Related commands
ring enable
rrpp ring-group
Use rrpp ring-group to create an RRPP ring group and enter RRPP ring group view.
Use undo rrpp ring-group to delete an RRPP ring group.
Syntax
rrpp ring-group ring-group-id
undo rrpp ring-group ring-group-id
Views
System view
Default command level
2: System level
Parameters
ring-group-id: Specifies the RRPP ring group ID in the range of 1 to 8.
Usage guidelines
When you remove a ring group, remove it on the edge node first and then on the assistant-edge node.
If you fail to follow the order, the assistant-edge node might fail to receive Edge-Hello packets and
mistakenly considers that the primary ring has failed.
After a ring group is removed, all subrings in the ring group do not belong to any ring group.
Examples
# Create RRPP ring group 1 and enter its view.
<Sysname> system-view
[Sysname] rrpp ring-group 1
[Sysname-rrpp-ring-group1]
Related commands
• domain ring
• display rrpp ring-group