R3303-HP HSR6800 Routers High Availability Command Reference

127
Smart Link configuration commands
The commands in this chapter are supported only when the SAP module is operating in bridge mode.
display smart-link flush
Use display smart-link flush to display information about the received flush messages.
Syntax
display smart-link flush [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the received flush messages.
<Sysname> display smart-link flush
Received flush packets : 10
Receiving interface of the last flush packet : GigabitEthernet3/0/1
Receiving time of the last flush packet : 19:19:03 2010/04/21
Device ID of the last flush packet : 000f-e200-8500
Control VLAN of the last flush packet : 1
Table 39 Command output
Field Descri
p
tion
Received flush packets Total number of received flush messages.
Receiving interface of the last flush packet Port that received the last flush message.
Receiving time of the last flush packet Time when the last flush message was received.
Device ID of the last flush packet Device ID carried in the last flush message.
Control VLAN of the last flush packet Control VLAN ID carried in the last flush message.