R3303-HP HSR6800 Routers High Availability Command Reference

129
Field Descri
p
tion
Protected VLAN
Protected VLANs of the smart link group. Referenced Multiple Spanning
Tree Instances (MSTIs) are displayed here. To view the VLANs mapped to
the referenced MSTIs, use the display stp region-configuration command.
Member Member port of the smart link group.
Role Port role: primary or secondary.
State Port state: active, standby, or down.
Flush-count Number of transmitted flush messages.
Last-flush-time
Time when the last flush message was transmitted (NA indicates that no
flush message has been transmitted).
flush enable
Use flush enable to enable flush update.
Use undo flush enable to disable flush update.
Syntax
flush enable [ control-vlan vlan-id ]
undo flush enable
Default
Flush update is enabled for smart link groups, and VLAN 1 is used for flush message transmission.
Views
Smart link group view
Default command level
2: System level
Parameters
control-vlan vlan-id: Specifies the control VLAN used for transmitting flush messages. The vlan-id
argument is in the range of 1 to 4094.
Usage guidelines
You must configure different control VLANs for different smart link groups.
Examples
# Disable flush update for smart link group 1.
<Sysname> system-view
[Sysname] smart-link group 1
[Sysname-smlk-group1] undo flush enable
Related commands
smart-link flush enable