R3303-HP HSR6800 Routers High Availability Command Reference

141
Table 42 Command output (standard mode)
Field Descri
p
tion
Run Mode
Current VRRP working mode:
• Standard—Standard mode.
• Load Balance—Load balancing mode.
Run Method
Current VRRP running mode:
• Real MAC—Real MAC mode, which means the virtual IP address of the
VRRP group is mapped to the real MAC address of the interface.
• Virtual MAC—Virtual MAC mode, which means the virtual IP address of
the VRRP group is mapped to the virtual MAC address.
Total number of virtual routers Number of VRRP groups.
Interface Interface to which the VRRP group belongs.
VRID ID of the VRRP group.
Adver. Timer VRRP advertisement interval, in seconds.
Admin Status
Administrative state:
• UP.
• DOWN.
State
Status of the router in the VRRP group:
• Master.
• Backup.
• Initialize.
Config Pri
Configured priority of the router, or in other words, the priority value
specified by using the vrrp vrid priority command.
Running Pri
Running priority of the router, or in other words, the current priority of the
router. With VRRP tracking configured, when the state of the monitored
interface or track entry changes, the priority of the router changes.
Preempt Mode
Preemptive mode:
• Yes—The router in the VRRP group operates in preemptive mode.
• No—The router in the VRRP group operates in non preemptive mode.
Delay Time Preemption delay, in seconds.
Become Master
Time to wait before the router becomes the master. The unit is milliseconds.
Only routers in backup mode have this information.
Auth Type
Authentication type:
• None—No authentication.
• Simple—Simple authentication.
• MD5—MD5 authentication.
Key Authentication key.
Virtual IP Virtual IP address of the VRRP group.
Virtual MAC
Virtual MAC address that corresponds to the virtual IP address of the VRRP
group. It is displayed only when the router is in master state.
Master IP Primary IP address of the interface where the router in master state resides.