R3303-HP HSR6800 Routers High Availability Command Reference

185
BFD configuration commands
bfd detect-multiplier
Use bfd detect-multiplier to configure the detection time multiplier.
Use undo bfd detect-multiplier to restore the default.
Syntax
bfd detect-multiplier value
undo bfd detect-multiplier
Default
The detection time multiplier is 5.
Views
Interface view
Default command level
2: System level
Parameters
value: Detection time multiplier in the range of 3 to 50.
Examples
# Configure the detection time multiplier as 6 on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] bfd detect-multiplier 6
bfd echo-source-ip
Use bfd echo-source-ip to configure the source IP address of BFD echo packets.
Use undo bfd echo-source-ip to remove the configured source IP address of BFD echo packets.
Syntax
bfd echo-source-ip ip-address
undo bfd echo-source-ip
Views
System view
Default command level
2: System level
Parameters
ip-address: Source IP address of BFD echo packets.